OUR PRODUCTS

Jacking Extrators, Bearing Puller Attachment

They are excellent Tools for Dismounting GEARS, PULLEYS, IMPELLERS, and BLOWERS etc.

If these elements have a Tapping they can directly be dismounted using these extractors, otherwise you will need to Drill & Tap two holes. If this is not possible a temporary NUT can be welded, and removed after Dismounting. The HIGH-TENSILE BOLTS/STUDS can be adjusted in the SADDLE by sliding them. Suitable Tips can be used as per tapping available in machine element.

Force can be applied manually by spindle/Tommy or by using a Hydraulic jack. All parts are made from High grade ALLOY STEEL, Heat treated and plated for corrosion prevention.

You can use a Bearing puller attachment Ref. Fig 3 to dismount Bearings having very little clearance behind them. This is made from FORGED and Hardened Alloy Steel to give excellent load carrying capacity.

MODEL SELECTION CHART – JACK BLOT EXTRACTOR

Model Min SpreadMax.
Spread
Std. Reach
Tips Capacity)
JBE-0 44 150 100 M6,M8,M10 3 Tons
JBE-1 66 205 160 M10, M12, M16 8 Tons
JBE-2 110 250 210 M12, M16, M20 15 Tons
Note: If you cannot adjust MIN SPREAD use an Auxiliary Plate Ref. Fig 1.

MODEL SELECTION CHART- BEARING PULLER ATTACHMENT

Model Min.
Max. Capacity
Recommended Model Min. Max. Capacity Jack Bolt Extractor
BP-0 6000
ID – 20mm
OD – 47mm
6205
ID- 25mm
OD – 52mm
3 Tons JBE - 0
BP-1 6204
ID – 20mm
OD – 47mm
6307
ID- 35mm
OD – 80mm
8 Tons JBE - 1
BP-2 6308
ID – 40mm
OD – 80mm
6318
ID- 90mm
OD – 190mm
15 Tons JBE - 2
NB EXTRA REACH CAN BE PROVIDED AS PER YOUR REQUIREMENTS.